Selenia User Guide
Chapter 6—The User Interface
76 MAN-03270 Revision 003
6.2.8.2.4 Eject
Select Admin>Eject to open the CD-RW drive drawer when there is a CD in the CD-RW
drive.
Note
When the CD-RW drive is empty, press the button on the
CD-RW drive to open the drawer.
When there is a disk in the drive, the drive drawer opens
only from the menu. To close the drive drawer, press the
CD-RW drive button.
6.2.8.2.5 Import
To import the information from a CD:
1. Open the CD-RW drive drawer.
• Press the CD-RW drive button to open the tray if there is no CD in the drive.
• Select Admin>Eject to open the drive if there is a CD in the drive.
2. Put the CD that contains the images to import on the tray.
3. Press the CD-RW drive button to close the tray.
4. Select Admin>Import.
5. In the dialog box, find the file (or files) to import.
• Select a "+" to open a list of folders and/or files.
• Select the empty box to select the file or folder.
Tip:
To deselect a file, click the checkmark. When you deselect a
folder, the files below the folder are not deselected. You
must clear each file.
6. Select the Import button. The file is copied from the disk and is available in the Select
a Patient screen.
Note Do Not press the Eject button on the drive while the system
reads from or writes to the disk.
If you try to eject or read the CD while the import process
finishes, you can cause the drive to stop.
To Next Page
Loading...
