EasyManuals Logo

Honda NC700 2012 User Manual

Honda NC700 2012
773 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #266 background imageLoading...
Page #266 background image
7-11
dummyheaddummyhead
FUEL SYSTEM
REMOVAL
Remove the fuel tank (page 7-8).
Clean around the fuel pump.
Loosen the fuel pump mounting nuts [1] in a crisscross
pattern in 2 or 3 steps and remove the nuts.
Remove the fuel pump unit [2] and packing [3].
Be careful not to damage the fuel level sensor float arm.
DISASSEMBLY/INSPECTION
Remove the screws [1] and Black wire terminals [2].
Disconnect the Pink wire connector [3] and Blue wire
connector [4].
Remove the fuel pump unit assembly [1] and O-ring [2]
from the fuel pump stay [3].
Remove the chamber [1].
Release the tab [2] and remove the fuel level sensor
assembly [3] from the fuel filter [4].
[1]
[3]
[2]
[3] [4]
[1]/[2] [1]/[2]
[2]
[1]
[3]
[1]
[2]
[4]
[3]

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda NC700 2012 and is the answer not in the manual?

Honda NC700 2012 Specifications

General IconGeneral
Engine Type670cc liquid-cooled parallel-twin
Bore x Stroke73.0mm x 80.0mm
Compression Ratio10.7:1
Front BrakeSingle 320mm disc with two-piston caliper
Rear BrakeSingle 240mm disc with single-piston caliper
Fuel Capacity3.7 gallons
Fuel SystemPGM-FI
Transmission6-speed
Front Suspension41mm telescopic fork
Rear SuspensionPro-Link single shock
Front Tire120/70-17
Rear Tire160/60-17
Wheelbase60.6 inches
Curb Weight472 pounds

Related product manuals