Honda NC700 2012 User Manual

19-12
dummyheaddummyhead
HYDRAULIC BRAKE
Connect a bleed hose [1] to the front brake caliper
center bleed valve [2].
Loosen the center bleed valve and pump the brake
pedal until no more fluid flows out of the bleed valve.
Tighten the bleed valve.
Connect a bleed hose [1] to the rear brake caliper bleed
valve [2].
Loosen the bleed valve and pump the brake pedal until
no more fluid flows out of the bleed valve.
Tighten the bleed valve.
BRAKE FLUID FILLING/AIR BLEEDING
BRAKE FLUID LINE
[1] [2]
[2]
[1]
REAR BRAKE CALIPER
ABS MODULATOR
FRONT MASTER CYLINDER
FRONT BRAKE CALIPER
PCV
REAR MASTER CYLINDER
DELAY VALVE

Honda NC700 2012 Specifications

General

Engine Type	670cc liquid-cooled parallel-twin
Bore x Stroke	73.0mm x 80.0mm
Compression Ratio	10.7:1
Front Brake	Single 320mm disc with two-piston caliper
Rear Brake	Single 240mm disc with single-piston caliper
Fuel Capacity	3.7 gallons
Fuel System	PGM-FI
Transmission	6-speed
Front Suspension	41mm telescopic fork
Rear Suspension	Pro-Link single shock
Front Tire	120/70-17
Rear Tire	160/60-17
Wheelbase	60.6 inches
Curb Weight	472 pounds