Honda NC700 2012 User Manual

22-23
dummyheaddummyhead
LIGHTS/METERS/SWITCHES
PARKING BRAKE SWITCH REMOVAL/
INSTALLATION
Remove the parking brake lever holder cover [1].
Disconnect the parking brake switch connectors [1].
Remove the parking brake switch screw [2], parking
brake switch [3] and switch spring [4].
Installation is in the reverse order of removal.
• Apply grease to the parking brake switch spring
sliding surface.
• Align the parking brake lever holder cover hole with
the holder boss.
[1]
[4]
[3]
[1]
[2]
TORQUE:
Parking brake switch screw:
1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)
Align

Honda NC700 2012 Specifications

General

Engine Type	670cc liquid-cooled parallel-twin
Bore x Stroke	73.0mm x 80.0mm
Compression Ratio	10.7:1
Front Brake	Single 320mm disc with two-piston caliper
Rear Brake	Single 240mm disc with single-piston caliper
Fuel Capacity	3.7 gallons
Fuel System	PGM-FI
Transmission	6-speed
Front Suspension	41mm telescopic fork
Rear Suspension	Pro-Link single shock
Front Tire	120/70-17
Rear Tire	160/60-17
Wheelbase	60.6 inches
Curb Weight	472 pounds