Honeywell Esser 8010 User Manual

Extinguishing Control Computer 8010 – 19-Inch
FB 798955.GB0 / 09.07 3
Table of contents
1
General ....................................................................................................................................................................... 4
1.1 Accessories / Options.......................................................................................................................................... 4
2 Display and control panel .......................................................................................................................................... 5
2.1 LED indicator for zones and outputs.................................................................................................................. 6
2.1.1 Status display of the zones............................................................................................................ 6
2.1.2 Status display of the outputs.......................................................................................................... 7
2.2 Operating displays............................................................................................................................................... 8
2.3 Trouble displays.................................................................................................................................................10
2.3 Keypad functions ...............................................................................................................................................12
2.4 Connect / disconnect zones..............................................................................................................................13
2.5 Connect / disconnect relay outputs ..................................................................................................................14
2.6 Test mode ..........................................................................................................................................................15
2.7 Revision mode ...................................................................................................................................................16
2.8 Resetting the panel............................................................................................................................................17
2.9 Lamp test............................................................................................................................................................17
3 Control indicator and Alarm counter.......................................................................................................................18
4 Installation Instruction...............................................................................................................................................19
0786
Novar GmbH, Dieselstrasse 2, D-41469 Neuss
06
0786 - CPD - 20223
Designs
Series 2 (Part No. 788010 / 788011)
Series 3 (Part No. 788012 / 788013)
19 inch Series 2 (Part No. 788024 / 788025)
19 inch Series 3 (Part No. 788014 / 788015)
Environmental conditions category: A
Response time for activation status: maximum 3 seconds
Response time for activation of outputs: maximum 1 second
The facility can be equipped in various configuration levels (in terms of number, system type and extinguishing
range options).
Number of extinguishing ranges: 1
System type for the extinguishing range: High or low gas pressure, for use with the following extinguishing gases:
argon, CO
2
, FM200 (HCF-227EA), Inergen, Novec KD 1230, nitrogen, Trigon
Available options with requirements:
–
Activation signal delay (Sect. 4.17); range 0 s to 60 s
–
Signal that represents the flow of the extinguishing agent (Sect.. 4.18)
–
Monitoring of the status / position of components (Sect. 4.19)
–
Stop button (Sect. 4.20)
–
Control of flooding times (Sect. 4.21); range 4 s to 600s
–
Initiation of subsequent flooding (Sect. 4.22)
–
Activation signals to devices within the fire extinguishing system (Sect. 4.24)
–
Trigger signal to spare bottles (Sect. 4.25)
–
Activation signals to devices outside the fire extinguishing system (Sect. 4.26)

Honeywell Esser 8010 Specifications

General

Brand	Honeywell
Model	Esser 8010
Category	Desktop
Language	English