Honeywell Esser 8010 - 12 Connections; 12.1 System Integration; 12.2 Analog Loop Connectivity

Extinguishing Control Computer 8010 – 19-Inch
FB 798955.GB0 / 09.07 73
12 Connections
12.1 Operation of the Extinguishing Control Computer in the Fire Alarm
System 8000 / IQ8Control
essernet
®
esserbus
®
/
esserbus
®
-PLus
Fig. 50: Operation of the Extinguishing Control Computer in the Fire Alarm System 8000 / IQ8Control
12.2 Extinguishing Control Computer 8010 connected to the analog loop
esserbus
®
transponder
esserbus
®
transponder
FACP
8000 / IQ8Control
esserbus
®
/
esserbus
®
-PLus
Fig. 51: Extinguishing Control Computer 8010 connected to the analog loop
The Extinguishing Control Computer 8010 is only triggered through fire detectors that are directly
connected. It is not
possible to trigger the LMST8010 through fire detectors connected elsewhere
within the system.
For additional information to the esserbus
®
communication transponder please refer to manual
(Part No. 798157).