Honeywell Esser 8010 - 2 Display and Control Panel; 2.1 LED Indicators

Extinguishing Control Computer 8010 – 19-Inch
FB 798955.GB0 / 09.07 5
2 Display and control panel
All operations of the Extinguishing Control Computer can be carried out with the clearly arranged function keys.
The keys can be locked with the built-in key switch.
12345678
910111213
1
4
7
0
8
5
23
6
9
0 0 0 5
Relay (AE) 1
2
3
4
5
6
7
8
9
10
11
12
13
1 2 3 4 5 6 7
891011
Unlocked
Disconnection
Switchover
Buzzer off
Lamp test
Zone
Output
Panel reset
On
Off
Test operation
Fan trouble
Common trouble
Emergency
operation
Power trouble
Battery trouble
Ground fault
Trouble 1
Blocking
Detector zone
Fire/Switch off/Trouble
In operation
Switching off
Test operation
Extra releasing 1
Outputs
Alarm
Emergency release
Extinguishing system
activated
Extinguishing system
enabled
Fig. 1: General view of the Display and control panel
1
LED status indicators
2
LED indicator Î Detector zone display No.1 to No.8 and
Technical zones No. 9 to No. 13
or
Relay outputs No. 1 to No. 13
3
Button to switch between LED indicators d for zones/relays
Button >Buzzer off< to acknowledge the internal Buzzer
4
Function keys
5
Fault indicators
6
Control indicator
7
Key-switch to lock/unlock the operating keys
8
Opening for Programming via Service PC
Connector must be sealed with dummy plug for ESD protection
9
Alarm counter
10
Ten-button keypad
11
Arrow keys to scroll display information