EasyManuals Logo

Honeywell Galaxy Dimension series User Manual

Honeywell Galaxy Dimension series
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #189 background imageLoading...
Page #189 background image
Galaxy Dimension Installer Manual
6-115
56 - Communications (cont’d)
2 = Group Settings
NOTE: This option is only displayed if the groups have been enabled (refer to option 63 = OPTIONS).
The event triggers are signalled to the telephone number, with the account number, programmed in the
menu options 56.1.2 = Telephone Number 1 and 56.1.3 = Account Number. However, each group can
be programmed to transmit event details to a unique telephone number and assigned a separate account
number. On selecting the Group Settings option the first system group is displayed. Select the required
group using the A or B keys and press the ent key, 1 = Telephone Number is displayed.
1 = Telephone Number
To assign a telephone number to the group press the ent key and enter the required number. The telephone
number can be a maximum of 22 digits (including dial pause and dial tone detect # characters); press the
ent key to save the programming and return to the previous menu level.
2 = Account Number
To assign an account number to the group press the ent key and enter the required number. The account
number can be a maximum of six digits; press the ent key to save the programming and return to the
previous menu level.
Account Groups
It is possible to have a number of groups bound by the same Account Number (an Account Group).This
means that one CL signal is not sent until all the groups within the Account Group are set. Individual groups
within the Account Group will not send a CL signal. The groups within the Account Group are identified by
a starred () Account Number, for example,
2112.
When the Account Group is fully set, the identifier of the CL message is 999 to identify it as an Account
Group that has set.
For unset, each group that is part of the Account Group can report individually that it is open.
NOTE: Account Groups only operate for SIA signalling.
3 = Microtech
Microtech format is a protocol that transmits detailed point identification information to a Personal Computer
(PC) which has the Galaxy Alarm Monitoring software installed.
The menu structure and programming of the options are identical to the SIA format. Refer to 2 = SIA for
programming details.
4 = Contact ID
Contact ID format is a protocol which transmits point identification information to an Alarm Receiving Centre
that is capable of receiving the Galaxy variant of contact ID.
The menu structure and programming of the options are identical to the SIA format except for the addition of
the 2 = Ack timeout programming option. This option selects how long the telecom module waits for the
handshake tone from the receiver and can be set to 1 (30 seconds) or 2 (60 seconds).

Table of Contents

Other manuals for Honeywell Galaxy Dimension series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Galaxy Dimension series and is the answer not in the manual?

Honeywell Galaxy Dimension series Specifications

General IconGeneral
ModelGalaxy Dimension series
UsersUp to 250
PartitionsUp to 8
Operating Temperature-10°C to +55°C
CompatibilityHoneywell Galaxy accessories and peripherals

Related product manuals