Honeywell Galaxy Dimension series User Manual

Galaxy Dimension Installer Manual
6-164
Option 64 – Assemble Zone
The Assemble Zones option allows 2 zone functions to be customised to the user’s requirements; these are
the 1 Custom-A and 2 Custom-B zones. Once a custom zone function has been assembled, it is assigned to
zones using option 52 = PROGRAM ZONES.
Programming a Custom Zone
The flexibility of this menu option allows for an extensive range of possibilities. It is therefore important that
the engineer is fully aware of the system and has a clear picture of what is required of the new zone function.
The procedure for assembling a custom zone has 4 stages:
1. Outputs
2. Status
3. Setting
4. Log
Table 6-29. Programming a custom Zone
64 - Assemble Zones
stuptuO=1:epyTtuptuOdelbasiD
teS
tesnU
tesnU/teS
epyttuptuotceles–B/A
tesnU,teS,delbasiDneewtebelggot–#
tesnU
/teS&
gnimmargorpevas–cse
sutatS=2tesnU=1delbasiD
mralA
mralAdnadelbasiDneewtebelggot–#
gnimmargorpevas–cse
t
ixE/yrtnE=2delbasiD
mralA
teStraP=3delbasiD
mralA
teSlluF=4delbasiD
mralA
gnitteS=3teSnigeB=1delbasiD
delbanE
dnad
elbasiDneewtebelggot–#
delbanE
gnimmargorpevas–cse
yrtnEnigeB=2delbasiD
delbanE
steS=3
metsyS
delbasiD
delbanE
goL=4delbasiD
tixEyrtnE
sruoH42
smralA
,tixE/yrtnE,delbasiDneewtebelggot–#
evas–csesmralA&sruoH42
gnimmargor
p

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals