Honeywell Galaxy Dimension series User Manual

Galaxy Dimension Installer Manual
6-177
Option 68 – Menu Access
The Menu Access option is used to assign access types to each of the menu options. This allows code types
2.3 – 3.6 to have access to menu options to which they would normally have insufficient access rights.
On selecting this option, 11 = OMIT ZONES is displayed along with the current code types assigned (3456
default).
Use the A or B key to select the required menu option or enter the option number directly and press the ent
key. The currently assigned types appear displayed on the top line of the display. The type maps default to the
standard access. To modify the types, press the required number keys; this toggles the access type numbers
on the bottom line of the display on and off.
Press the ent key to save the programming and return to the previous menu level. If the level is assigned to the
option the number is displayed, if it has been removed a dash (–) is displayed.
For example, type 2.5 5 codes can be given access to menu 42 which would allow them to allocate codes.
Users can only allocate codes up to the type that they have been assigned. A type 2.4 user cannot assign a
user code as type 2.5.
NOTE: The following menu access types are fixed: option 48 = DATELOCK level 3.6, and option 68 =
MENU ACCESS engineer access (type 3.7 and 3.8).
LevelsLevels
LevelsLevels
Levels
––-6––-6
––-6––-6
––-6
42=CODES42=CODES
42=CODES42=CODES
42=CODES
68 - Menu Access
Levels 3456Levels 3456
Levels 3456Levels 3456
Levels 3456
11=OMIT ZONES11=OMIT ZONES
11=OMIT ZONES11=OMIT ZONES
11=OMIT ZONES
Levels 3456Levels 3456
Levels 3456Levels 3456
Levels 3456
>–-5- >–-5-
>–-5- >–-5-
>–-5-

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals