Honeywell Galaxy Dimension series User Manual

Galaxy Dimension Installer Manual
6-19
Option 25 – Access Doors
This option dispays information about the DCM and MAX readers together with users connected to the
system. There are 4 options:
1 = View All
This option displays the access log but with no filter. All events are displayed.
NOTE: If the Access mode has not been enabled (refer to option 69.1 = Mode) the message No Entries is
displayed on entering this option.
2 = User
This option shows all events for the selected user. Managers can see all the users. Induvidual users can only
see their own events.
3 = Reader
Accessing this option when the access mode is enabled (option 69.1) and there are MAX/DCM modules
connected to the system displays the address and descriptor details of the first MAX/DCM module on the
system. Press the A and B keys to view details of the other MAX/DCM modules on the system.
If there are no MAX/DCM modules attached to the system the message None Detected is displayed.
4 = Date
This option allows a specific date to be entered in the format DD/MM/YY. This forces the display to go to a
specific date.
Access Log
Access events are transmitted using Contact ID, SIA and Alarm Monitoring formats. Access events transmit-
ted are listed in the table that follows:
25 - Access Doors
Table 6-3. Access Log Event Size
tnevEnoitpircseDedoCAIS
DIC
edoC
reggirToNdoMDIresU
sseccA
detnarG
dnadetneserpdracdilaV
detadilav
GD124SGATXAMseYseY
draCdilavnI
tonsahdetneserpdraC
otnodemmargorpneeb
metsys
DD224SGATXAMseYoN
draC
detcejeR
tub,detneserpdracdilaV
nosaeremosrofdetcejer
KD224SGATXAMseYseY
Table 6-2. Access Log Events
Galaxy Variant Access Log
Event Size
GD-48 500
GD-96 1000
GD-264 1000
GD-520 1000

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals