Scan the barcodes below to change the message length. Refer to Message Length Description
(page 82) for additional information. Minimum and Maximum lengths = 0-48. Minimum
Default = 0, Maximum Default = 48.
This function allows the scanner to append the data from several Code 39 barcodes together
before transmitting them to the host computer. When the scanner encounters a Code 39
barcode with the append trigger character(s), it buffers Code 39 barcodes until it reads a Code
39 barcode that does not have the append trigger. The data is then transmitted in the order in
which the barcodes were read (FIFO). Default = Off.
To Next Page
Loading...
