Honeywell HH1800 - Reread Delay

HH1800 User Guide 33
Reread Delay
This sets the time period before the scanner can read the same barcode a second time.
Setting a reread delay protects against accidental rereads of the same barcode. Longer delays
are effective in minimizing accidental rereads. Use shorter delays in applications where
repetitive barcode scanning is required. Reread Delay only works when in a Presentation
Mode (see page 37). Default = Medium.
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)