This User Guide provides installation and programming instructions for the HH1800 corded
area-imaging scanner. Product specifications, dimensions, warranty, and customer support
information are also included.
Honeywell barcode scanners are factory programmed for the most common terminal and
communications settings. If you need to change these settings, programming is accomplished
by scanning the barcodes in this guide.
An asterisk (*) next to an option indicates the default setting.
After you open the shipping carton containing the product, take the following steps:
• Check for damage during shipment. Report damage immediately to the carrier who
delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.
A scanner can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the computer.
HH1800 Scanner USB Connection:
To Next Page
Loading...
