Honeywell HH1800 - Step 2 - Ship a Picture Using IMGSHP; Image Ship - IMGSHP

108 HH1800 User Guide
* UPC-E1 Off
EAN/JAN-13
<Default All EAN/JAN Settings>
EAN/JAN-13 On/Off
* On
Off
Convert UPC-A to EAN-13
When UPC-A Converted to EAN-13 is selected, UPC-A barcodes are converted to 13 digits
EAN-13 codes by adding a zero to the front. When Do not Convert UPC-A is selected, UPC-A
codes are read as UPC-A.
UPC-A Converted to EAN-13
* Do not Convert UPC-A
EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end
of the scanned data or not. Default = On.