Honeywell HH1800 - Standard Connector Pinouts

130 HH1800 User Guide
Poor Quality DotCodes
This setting improves the scanner’s ability to read damaged or badly printed DotCodes.
Default = Poor Quality DotCodes Off.
Poor Quality DotCodes On
* Poor Quality DotCodes Off
DotCode Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description
(page 82) for additional information. Minimum and Maximum lengths = 1-2400. Minimum
Default = 1, Maximum Default = 2400.
Minimum Message Length
Maximum Message Length