Honeywell HH1800 - Code 128; Code 128 On;Off

58 HH1800 User Guide
the transmission of each control character in the message string. Scan the Interfunction Delay
barcode below, then scan the number of 5ms delays, and the Save barcode from the
Programming Chart, beginning on page 211.
Interfunction Delay
To remove this delay, scan the Interfunction Delay barcode, then set the number of delays to
0. Scan the Save barcode from the Programming Chart, beginning on page 211.
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be placed
between each scan transmission. Scan the Intermessage Delay barcode below, then scan the
number of 5ms delays, and the Save barcode from the Programming Chart, beginning on page
211.
Intermessage Delay
To remove this delay, scan the Intermessage Delay barcode, then set the number of delays to
0. Scan the Save barcode from the Programming Chart, beginning on page 211.
Prefix
Scanned Data
Suffix
STX
1
HT
3
4
5
CR
Interfunction Delays
2
LF
1st Scan Transmission
2nd Scan Transmission
Intermessage Delay