Honeywell HH1800 - EAN-13 Beginning with 434;439 Addenda Required

112 HH1800 User Guide
EAN-13 Beginning with 434/439 Addenda Required
This setting programs the scanner to require any combination of a 2 digit addenda or a 5 digit
addenda on EAN-13 barcodes that begin with a “434” or “439.” The following settings can be
programmed:
Require Addenda: All EAN-13 barcodes that begin with a “434” or “439” must have a 2 digit
addenda, a 5 digit addenda, or a combination of these addenda. The EAN- 13 barcode with
the addenda is then transmitted as a single, concatenated barcode. If the required addenda is
not found within the Addenda Timeout period, the EAN-13 barcode is discarded.
Don’t Require Addenda: If you have selected Require Addenda, and you want to disable this
feature, scan Don’t Require Addenda. EAN-13 barcodes are transmitted, depending on the
setting you are using for EAN/JAN-13 Addenda Required.
Default = Don’t Require Addenda.
* Don’t Require Addenda
Require 2 Digit Addenda
Require 5 Digit Addenda
Require 2 or 5 Digit Addenda