HH1800 User Guide 161
Configure with EZConfig for Scanning
Use the EZConfig for Scanning tool to configure your scanner online:
1. Access the Honeywell Technical Support Downloads Portal at
https://hsmftp.honeywell.com.
2. Go to Software > Barcode Scanners > Software > Tools and Utilities > EZConfig for
Scanning > Current.
3. Download the Setup version of EZConfig for Scanning.
4. Open EZConfig to configure your scanner.
Reset the Factory Defaults
Caution: This selection erases all your settings and resets the scanner to the original
factory defaults. It also disables all plugins.
If you aren’t sure what programming options are in your scanner, or you’ve changed some
options and want to restore the scanner to factory default settings, first scan the Remove
Custom Defaults barcode, then scan Activate Defaults. This resets the scanner to the factory
default settings.
To Next Page
Loading...
