Honeywell HH1800 - UPC-E0 Leading Zero; UPC-E0 Addenda; Upc-E1

HH1800 User Guide 107
UPC-E0 Leading Zero
This feature allows the transmission of a leading zero (0) at the beginning of scanned data. To
prevent transmission, scan Off. Default = On.
* On
Off
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off for both 2
Digit and 5 Digit Addenda.
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
* 5 Digit Addenda Off
UPC-E1
Most U.P.C. barcodes lead with the 0 number system. For these codes, use UPC-E0 (page
103). If you need to read codes that lead with the 1 number system, use the UPC-E1 On
selection. Default = Off.
UPC-E1 On