Honeywell HH1800 - Trigger Click; Good Read and Error Indicators; Beeper - Good Read; Beeper Volume - Good Read

24 HH1800 User Guide
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the Trigger Click On
barcode below. Scan the Trigger Click Off code if you don’t wish to hear the click. (This
feature has no effect on serial or automatic triggering.) Default = Trigger Click Off.
*Trigger Click Off
Trigger Click On
Good Read and Error Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this option off
only turns off the beeper response to a good read indication. All error and menu beeps are
still audible. Default = Beeper - Good Read On.
Beeper - Good Read Off
* Beeper - Good Read On
Beeper Volume – Good Read
The beeper volume codes modify the volume of the beep the scanner emits on a good read.
Low
Medium
* High
Off