By default, all ASCII control characters are transmitted with barcode data. These
non-printable characters are translated into predefined key strokes, or CTRL+X functions (see
ASCII Conversion Chart (Code Page 1252), beginning on page 203). If these key strokes
interfere with your host’s software application, scan Disable to keep these ASCII control
characters from being transmitted. Default = Enable.
You can also use a custom data format (see Data Format beginning on page 59) to translate
these characters into a more meaningful output.
Intercharacter, Interfunction, and Intermessage
Delays
Some terminals drop information (characters) if data comes through too quickly.
Intercharacter, interfunction, and intermessage delays slow the transmission of data,
increasing data integrity.
To Next Page
Loading...
