Flattens the image to account for variations in illumination across the image.
0C Compensation disabled (default)
1C Compensation enabled
Indicates the number of bits per pixel in the transmitted image (KIM or BMP format only).
8D 8 bits per pixel, grayscale image (default)
1D 1 bit per pixel, black and white image
An edge sharpen filter cleans up the edges of an image, making it look cleaner and sharper.
While edge sharpening does make the image look cleaner, it also removes some fine detail
from the original image. The strength of the edge sharpen filter can be entered from 1 to 24.
Entering a 23E gives the sharpest edges, but also increases noise in the image.
0E Don’t sharpen image (default)
14E Apply edge sharpen for typical image
ne Apply edge sharpen using strength n (n = 1-24)
To Next Page
Loading...
