Name: Honeywell IntelliDoX
Brand: Honeywell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INTELLIDOX DOCKING MODULE USER MANUAL || CONFIGURE SETTINGS VIA

SAFETY SUITE DEVICE CONFIGURATOR AND SAFETY SUITE SOFTWARE

HONEYWELL PAGE 61 OF 119

Configure Settings via Safety Suite Device Configurator

and Safety Suite Software

This section contains general instructions for creating and transferring

configuration files to modules and detectors via Safety Suite Device

Configurator and Safety Suite software

Table of Contents2
About this Publication4
Important Safety Information: Read First5
Getting Started6
About the Intellidox Docking Module7
What's in the Box8
Intellidox at a Glance9
Inlet Keys10
LCD Screen12
Keypad13
Assemble Modules14
Work Plan: Assemble Individual Modules15
Work Plan: Assemble Groups of up to Five Connected Modules16
Assemble the Stand17
Connect Modules18
Mount on a Wall19
Mount on Parallel DIN Rails23
Prepare Modules for Use26
Attach the End Plate27
Connect the Exhaust Tubing28
Connect the Inlet Filter29
Insert the Inlet Plugs30
Connect the Power31
Connect the Module to a Network32
Dock Station Settings Menu38
Display the Adjust Dock Station Settings Menu39
Adjust the LCD Brightness40
Adjust Date and Time Settings41
Configure Gas Inlets42
Display the Select Language Menu44
Display the about Summary Screen45
Detector Operations46
Insert a Detector47
Detector Operations Menu48
Bump Test49
Fastbump52
Calibration54
Transfer Datalogs from a Detector59
Display the Adjust Dock Station Settings Menu60
Charge a Detector61
Configure Settings Via Safety Suite Device Configurator and Safety Suite Software62
Protect Module Operations with a Passcode63
Adjust Time and Date Settings64
Configure the Intellidox and the Device Via Safety Suite65
Configure Module and Detector Settings Via Safety Suite Device Configurator67
Hibernation74
Configure Hibernation75
Creating a Hibernation Configuration File Via Safety Suite Software77
Transfer Data Files80
Transfer Data Files from the Module81
Update Firmware84
Update Module Firmware85
Update Detector Firmware89
Replace Detector Cradle and Calibration Insert92
Upgrade the Intellidox to Fit Compatible Detectors93
Replace the Detector Cradle94
Replace the Calibration Insert96
Maintenance98
Clean and Maintain the Module99
Calibration Equipment and Gases100
Technical Specification and Warranty101
Technical Specification102
Limited Warranty and Limitation Liability104
Troubleshooting105
Compliance Tests106
Detectors108
Modules109
Network Connections112
Calibration of PID Sensor113
Batteries114
Security Recommendations115
Glossary117
Contact Us120

Honeywell IntelliDoX User Manual

Table of Contents

Questions and Answers:

Honeywell IntelliDoX Specifications

Related product manuals

Brand	Honeywell
Model	IntelliDoX
Category	Control Unit
Language	English