Name: Honeywell IntelliDoX
Brand: Honeywell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INTELLIDOX DOCKING MODULE USER MANUAL || CONFIGURE SETTINGS VIA

SAFETY SUITE DEVICE CONFIGURATOR AND SAFETY SUITE SOFTWARE

HONEYWELL PAGE 63 OF 119

Adjust Time and Date Settings

Via Safety Suite Device Configurator Software

Follow the instructions in this section when you want to adjust the module time and date

settings automatically via Safety Suite Device Configurator software. For connected

modules, you must adjust time and date settings for each module in the group.

You must use Safety Suite Device Configurator when you want to:

• Configure a module or detector to adjust for Daylight Savings Time;

• Synchronize a module time and date to a PC; and

• Configure compatible detectors to synchronize time and date settings to the module

when inserted.

For more information, refer to the Safety Suite Device Configurator operator manual.

Via Safety Suite

Adjust the module’s time and date settings automatically via the Safety Suite Device

Configurator. For connected modules, you must adjust time and date settings for each

module in the group.

NOTE: You must use Safety Suite Device Configurator when you want to:

• Configure a module or detector to adjust for Daylight Savings Time

• Synchronize a module time and date to a PC

• Configure compatible detectors to synchronize time and date settings to the

module after inserting the device.

1. From the main window, click IntelliDoX Configuration.

2. From the IntelliDoX Configuration panel, click DATE & TIME, and then select

SYNCHRONIZE WITH SERVER. A Date and time sync successfully message is

displayed.

Questions and Answers:

Need help?

Do you have a question about the Honeywell IntelliDoX and is the answer not in the manual?

Honeywell IntelliDoX Specifications

General