Bluetooth Indicators
There may be audible or visual signals as paired devices re-connect with the Thor VM1.
Only printers or scanners are recognized and displayed in the Bluetooth panel. All other Bluetooth devices are ignored.
Taskbar Icon Legend
Thor VM1 is connected to one or more of the targeted Bluetooth device(s).
Thor VM1 is not connected to any Bluetooth device.
Thor VM1 is ready to connect with any Bluetooth device.
Thor VM1 is out of range of all paired Bluetooth device(s). Connection is inactive.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the Thor VM1 Bluetooth
scan range, the Bluetooth connection between the paired device and the Thor VM1 is lost. There may
be audible or visual signals as paired devices disconnect from the Thor VM1.
Bluetooth LED Legend
Blue, blinking slowly Bluetooth is active but not connected to a device.
Blue, blinking medium Bluetooth is paired and connected to a device.
Blue, blinking fast Bluetooth is discovering other Bluetooth devices.
Off Bluetooth hardware has been turned off or does not exist in the Thor VM1.
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor does it stop authorized Bluetooth-
enabled devices from pairing with the Thor VM1 while AppLock is in control.
3-68
To Next Page
Loading...
Need help?
General
