Honeywell Thor VM1 Reference Guide

Keyboard LEDs
The keyboard LEDs are located near the specified key.
2nd LED
LED Behavior Status
Solid Green
l Indicates the 2nd modifier key is active. 2nd mode is invoked for the next keypress
only.
l Pressing the 2nd key a second time exits this modifier mode and turns off the LED.
Off 2nd mode is not invoked.
Shift LEDs
For the 64 key keyboard, there is one LED next to each Shift key. Both LEDs indicate the status of Shift mode and Caps Lock
mode.
For the 12-key keyboard, there is a single Shift key and a single LED.
LED Behavior Status
Blinking Green
l Indicates the keypad is in Shift mode. Shift mode is invoked for one keypress.
l Pressing the Shift key places the system in Shift mode.
l To exit Shift mode, press the Shift key again.
Solid Green
l When solid Green, indicates the keypad is in Caps Lock mode. Caps Lock mode is
invoked until canceled.
l Pressing the 2nd key followed by the Shift key places the system in Caps Lock
mode.
l To exit Caps Lock mode, press 2nd + Shift again.
Off Neither Shift or Caps Lock mode is invoked.
Ctrl LED
The Ctrl key is not present on the 12-key keypad.
LED Behavior Status
Solid Green
l Indicates the Ctrl modifier key is active. Ctrl mode is invoked for the next keypress
only.
l Pressing the Ctrl key a second time exits this modifier mode and turns off the LED.
Off Ctrl mode is not invoked.
2-33

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English