Buttons
Symbology Settings
Individually enable or disable a bar code from being scanned, set the mini-
mum and maximum size bar code to accept, strip Code ID, strip data from
the beginning or end of a bar code, or (based on configurable Bar Code
Data) add a prefix or suffix to a bar code before transmission.
Ctrl Char Mapping
Define the operations the Wedge performs on control characters (values
less than 0x20) embedded in bar codes.
Custom Identifiers
Defines an identifier that is at the beginning of bar code data which acts as
a Code ID. After a Custom Identifier is defined, Symbology Settings can
be defined for the identifier just like standard Code IDs.
See Also: "Data Processing Overview"
3-82
To Next Page
Loading...
Need help?
General
