Honeywell Thor VM1 Reference Guide

4. Tap Activate.
5. Verify the activation process is successful by reviewing the message below the Activation Type group.
Autoconnect
When checked, Autoconnect is enabled. The Connection Manager automatically connect when necessary, such as when
Internet Explorer is launched.
Data Connection Test
Tap the Connect button to make a temporary test connection to validate the carrier account.
Entries identified with an asterisk (*) are used to configure the test connection.
Tap the Save Connection Data button to save the connection parameters.
3-110

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English