Honeywell Thor VM1 Reference Guide

12-Key Keypad Key Map
The 12-key keyboard is available on the Thor VM1 running Windows CE 6.0.
l Because the keyboard only has 12 keys, all functions are not visible (or printed on the keyboard). Therefore the Thor
VM1 keyboard supports what is called hidden keys -- keys that are accessible but not visible on the keyboard.
l A key or combination of keys can be remapped to provide a single keypress, a string of keypresses or to execute an
application or command. All key remapping is done using the KeyPad option in the Control Panel (Start > Settings >
Control Panel > Keypad).
l The keyboard keys are backlit. The keyboard backlight and the display share the same timer, which is configured in
Start > Settings > Control Panel > Power. By default, when the display is On, the keyboard backlight is also On. The
keyboard backlight can be disabled, see Start >Settings > ControlPanel > Options > Misc tab.
l The warmboot behavior of CapsLock can be set via the Misc tab in Start > Settings > Control Panel > Options.
Note: When automatic brightness control is enabled for a Thor VM1 with an Outdoor display, the manual
display brightness controls in the table below have no effect.
To get this Key / Function Press These Keys in this Order
Power On/Suspend Power
F1 F1
F2 F2
F3 F3
F4 F4
F5 F5
8-7

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English