Honeywell Thor VM1 Reference Guide

Data Options Tab
Start > Settings > Control Panel >Data Collection > Data Options tab
Bar code manipulation parameter settings on this tab are applied to the incoming data resulting from successful bar code scans
sent to the Thor VM1 for processing.
Note: The Data Options tab contains only those options available for one type of decoding engine.
The Data Options tab contains several options to control bar code processing. Options include:
l Defining custom Code IDs
l Disable processing of specified bar code symbologies
l Rejecting bar code data that is too short or too long
l Stripping characters including Code ID, leading or trailing characters and specified bar code data strings
l Replacing control characters
l Adding a prefix and a suffix.
Enable Code ID
Choose an option in the Enable Code ID drop-down box:
None Disables transmission of a Code ID. The only entry in the Symbology combo box is All.
Custom ID
Does not change the scanner’s Code ID transmission setting. The combo box in the Symbology con-
trol panel is populated with any configured Custom code IDs.
3-81

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English