Honeywell Thor VM1 Reference Guide

System
Start > Settings > Control Panel > System
Use these Thor VM1 panels to:
l Review System and mobile device data and revision levels.
l Adjust Storage and Program memory settings.
l Assign a device name and device descriptor.
Factory Default Settings
General No user interaction
Memory 1/3 storage, 2/3 program memory
Device Name Unique to equipment type
Device Description unique to equipment type
Copyrights No user interaction
General Tab
System: This screen is presented for information only. The System parameters cannot be changed by the user.
Computer: The processor type is listed. The type cannot be changed by the user. Total computer memory and the
identification of the registered user is listed and cannot be changed by the user.
Memory sizes given do not include memory used up by the operating system. For example, a system with 128 MB may only
report 99 MB memory, since 29 MB is used by the operating system. This is actual DRAM memory, and does not include
internal flash used for storage.
3-151

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English