The statistics results are reset or restarted under the following conditions:
•
Selecting the measurement.
•
Turning on the display of the signal under measurement.
•
Changing any of the thresholds in the define measure menu.
•
Changing the time base window, scale, position, reference, or resolution
(number of points)
•
Changing the channel state, scale, or offset.
•
Changing the trigger definition.
•
Changing the sampling mode between real time and equivalent time.
•
Redefining the waveform math function, if the measurement is calculated
on a function.
•
Storing to memory, if the measurement is calculated on a memory.
•
Changing the filter bandwidth, if measuring filtered data.
•
Clearing the display.
Define Measure Menu
Statistics
7–10
To Next Page
Loading...
