Self-Test
The Self-test menu is for performing service work on the oscilloscope. Refer
to the Service Guide supplied with the oscilloscope for details about this
menu.
Firmware Support
When you press the Firmware support key, a screen similar to figure 19-4 is
displayed.
The Firmware support softkey lets you print a copy of the problem report
form or the firmware request form. You may not have originally purchased
the oscilloscope or you may share the oscilloscope with several coworkers.
These forms are your way of communicating with the manufacturer of the
oscilloscope, Hewlett-Packard. Because both forms reside in the memory of
the oscilloscope, you can print out a copy of either form whenever you need a
copy.
Figure 19-4
Utility Menu
Self-Test
19–14
To Next Page
Loading...
