HP 54710A - 19 Utility Menu HP-IB Setup; HP-IB Setup

HP-IB Setup
You may have several instruments connected by a common bus to a
computer or controller. Each instrument on the bus has a separate
identifying address, so that the computer or controller can communicate with
only one instrument at a time. The HP-IB setup menu lets you select an
address from 0 to 31. The address number you select is the address that a
computer or controller uses to communicate with the oscilloscope. The
default HP-IB address for oscilloscopes is 7.
Utility Menu
HP-IB Setup
19–3