HP 54710A - Page 251

Channel
Display
CAL output on
HP 54721A plug
On
Off
Probe attenuation Unchanged
Scale 1 V/div or maximum Units Volts
Offset 0 V External offset 0.0
Sensitivity
(HP 54711A only)
Default External gain 1.0
Probe atten units Ratio Input
dc 1 M
Ω
if available or
dc 50
Ω
Histogram
Mode Off Run until Forever
Axis Horizontal Run until waveforms 1000 waveforms
Window source First available channel Run until samples 100000 samples
X1 & X2 position 0 Scale (log) 20 dB
Y1 & Y2 position 0 Offset (log)
−
80 dB
Scale type Linear Scale (linear) 25%
Scale mode Auto Offset (linear) 0%
Utility
CRT pattern Off
Light output Off
Color purity Off
Limit test
Test Off Run until Forever
Measurement None Run until failures 1 failure
Fail when Outside Run until waveforms 100000 waveforms
Upper limit 10000 Store summary Off
Lower limit
−
10000
Store screen Off
Store waveforms Off
Mask test
Test Off Run until Forever
Scale source Channel 1 Failed waveforms 1 failure
X1 position
−
80
µ
s
Failed samples 1 sample
∆
X160
µ
s
Waveforms 1000000
1 level 3 V Samples 1000000
0 level
−
3 V
Store waveforms Off
Store summary Off
Store screen Off
Store waveforms Off
Setup Menu
Default Setup
14–6