The following events reset all the mask test results, which starts a new
summary file.
•
Changing any of the thresholds in the define measure menu.
•
Changing one of the polygons, mask scaling, or mask source.
•
Changing the trigger definition.
•
Changing the sampling mode between real time and equivalent time.
•
Changing the filter bandwidth, if measuring filtered data.
•
Changing the record length.
•
Changing the interpolator setting.
•
Clearing the display.
Off
Off means that the summary data is not printed or stored.
Printer
Printer sends the summary to the destination determined by
the Print selections. The destination can be one of several printers. The
printer selection gives you a hardcopy of the summary information.
See also
Chapter 15, "Setup Print Menu" for a description of the selections.
Mask Menu
Fail Action
23–21
To Next Page
Loading...
