HP 8712ET User Manual

8-18 ES User’s Guide
Hardkey/Softkey Reference
C
Softkey in the file utilities menu. Used to copy files.
See “Other File Utilities” on page 4-63 in for more information.
Access Keys:
Softkey in the file utilities menu. Used to copy files.
See “Other File Utilities” on page 4-63 for more information.
Access Keys:
Softkey in the copy file menu. Used to select the analyzer's built-in disk
drive as the destination drive for copying of files. Displays the
character entry menu to rename file (if desired) prior to copying.
Access Keys: , or
Softkey in the copy file menu. Used to select the analyzer's internal
non-volatile RAM as the destination drive for copying of files. Displays
the character entry menu to rename the file (if desired) prior to
copying.
Access Keys: , or
Softkey in copy file menu. Used to select the analyzer's internal
volatile RAM as the destination drive for copying of files. Displays the
character entry menu to rename file (if desired) prior to copying.
Access Keys: , or
Softkey in the system configuration menu. Displays the menu to set
the external CRT position and timing parameters for best image.
These settings are not affected by presetting the analyzer.
NOTE These adjustments also affect the internal CRT of
the analyzer.
See “Using an External VGA Monitor” on page 4-87 for more
information.
Access Keys:
Copy All Files
SAVE RECALL
File Utilities
Copy File
SAVE RECALL
File Utilities
Copy to
3.5” Disk
SAVE RECALL
File Utilities
Copy File
Copy All Files
Copy to
NonVol RAM
SAVE RECALL
File Utilities
Copy File
Copy All Files
Copy to
Vol RAM
SAVE RECALL
File Utilities
Copy File
Copy All Files
CRT Adjust
SYSTEM OPTIONS
System Config

HP 8712ET Specifications

General

Brand	HP
Model	8712ET
Category	Measuring Instruments
Language	English