ES User’s Guide 8-93
Hardkey/Softkey Reference
T
Softkey in the define save menu. For use with a multiport test set.
Toggle to ON if you want to save the TSet Cal.
Refer to the multiport test set User's and Service Guide for more
information.
Access Keys:
Softkey in the cal kit menu of 75 ohm instruments. Selects the type of
cal kit as type-F.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
NOTE By convention, cal kits indicate the sex of the port
with which they are used. For example, the
default cal kit for the analyzer is type-N female
because the front panel RF ports are female (the
calibration standards, in turn, have male
connectors).
Softkey in the cal kit menu. Selects the type of cal kit as type-N(f). Also
known as the default cal kit.
See the Note in the description above.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
Softkey in the cal kit menu. Selects the type of cal kit as type-N(m).
See the Note in the description above.
See “Calibration Kits” on page 6-23 for more information.
Access Keys:
SAVE RECALL
CAL
CAL
CAL
To Next Page
Loading...
Need help?
General
