HP A5500 SI Switch Series User Manual

210
# Configure Switch C and Switch E as a static RPF peers of Switch B.
[SwitchB] ip ip-prefix list-df permit 192.168.0.0 16 greater-equal 16 less-equal 32
[SwitchB] msdp
[SwitchB-msdp] peer 192.168.3.2 connect-interface vlan-interface 102
[SwitchB-msdp] peer 192.168.1.2 connect-interface vlan-interface 101
[SwitchB-msdp] static-rpf-peer 192.168.3.2 rp-policy list-df
[SwitchB-msdp] static-rpf-peer 192.168.1.2 rp-policy list-df
[SwitchB-msdp] quit
# Configure Switch B as a static RPF peer of Switch C.
[SwitchC] ip ip-prefix list-c permit 192.168.0.0 16 greater-equal 16 less-equal 32
[SwitchC] msdp
[SwitchC-msdp] peer 192.168.1.1 connect-interface vlan-interface 101
[SwitchC-msdp] static-rpf-peer 192.168.1.1 rp-policy list-c
[SwitchC-msdp] quit
# Configure Switch B as a static RPF peer of Switch E.
[SwitchE] ip ip-prefix list-c permit 192.168.0.0 16 greater-equal 16 less-equal 32
[SwitchE] msdp
[SwitchE-msdp] peer 192.168.3.1 connect-interface vlan-interface 102
[SwitchE-msdp] static-rpf-peer 192.168.3.1 rp-policy list-c
[SwitchE-msdp] quit
5. Verify the configuration
Use the display bgp peer command to view the BGP peering relationships between the switches. If the
command gives no output information, a BGP peering relationship has not been established between the
switches.
When the multicast source in PIM-SM 1—Source 1—and the multicast source in PIM-SM 2—Source 2—
send multicast information, receivers in PIM-SM 1 and PIM-SM 3 can receive the multicast data. Use the
display msdp brief command to view the brief information of MSDP peering relationships between the
switches. For example:
# View the brief MSDP peer information on Switch B.
[SwitchB] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up Listen Connect Shutdown Down
2 2 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
192.168.3.2 Up 01:07:08 ? 8 0
192.168.1.2 Up 00:16:39 ? 13 0
# View the brief MSDP peer information on Switch C.
[SwitchC] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
192.168.1.1 Up 01:07:09 ? 8 0

HP A5500 SI Switch Series Specifications

General

Layer Support	Layer 2 and Layer 3
MAC Address Table	16K entries
Routing Protocol	RIP, OSPF, BGP, IS-IS
Management	Web, CLI, SNMP
Input Voltage	100-240 V AC
Operating Temperature	0°C to 45°C
Ports	48 x 10/100/1000 ports, 4 x 10-Gigabit SFP+ ports
Dimensions	440 x 430 x 44 mm
Weight	5.5 kg
Operating Humidity	10% to 95% (non-condensing)