HP A5500 SI Switch Series User Manual

92
To do... Use the command... Remarks
Enable IGMP igmp enable
Required
Disabled by default
Enabling IGMP in a VPN instance
Follow these steps to enable IGMP in a VPN instance:
To do... Use the command... Remarks
Enter system view system-view —
Create a VPN instance and enter
VPN instance view
ip vpn-instance vpn-instance-name —
Configure an RD for the VPN
instance
route-distinguisher route-
distinguisher
Required
No RD is configured by default.
Enable IP multicast routing multicast routing-enable
Required
Disabled by default
Enter interface view
interface interface-type interface-
number
—
Associate the current interface
with the VPN instance
ip binding vpn-instance vpn-
instance-name
Required
No VPN instance is associated
with an interface by default.
Enable IGMP igmp enable
Required
Disabled by default
NOTE:
For more information about the ip vpn-instance, route-distinguisher and ip binding vpn-instance
commands, see the
MPLS Command Reference .
For more information about the multicast routing-enable command, see the
IP Multicast Command
Reference
.
Configuring IGMP versions
Because the protocol packets of different IGMP versions vary in structure and type, you must configure
the same IGMP version for all routers on the same subnet before IGMP can work properly.
Configuring an IGMP version globally
Follow these steps to configure an IGMP version globally:
To do... Use the command... Remarks
Enter system view system-view —
Enter public network IGMP view or
VPN instance IGMP view
igmp [ vpn-instance vpn-instance-
name ]
—
Configure an IGMP version globally version version-number
Optional
IGMPv2 by default

HP A5500 SI Switch Series Specifications

General

Brand	HP
Model	A5500 SI Switch Series
Category	Switch
Language	English