177
[SwitchD] display pim rp-info
VPN-Instance: public net
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 10.110.9.1
Priority: 192
HoldTime: 150
Uptime: 00:03:42
Expires: 00:01:48
Group/MaskLen: 239.0.0.0/8
RP: 10.110.4.2 (local)
Priority: 192
HoldTime: 150
Uptime: 00:06:54
Expires: 00:02:41
# View the RP information on Switch F.
[SwitchF] display pim rp-info
VPN-Instance: public net
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 10.110.9.1 (local)
Priority: 192
HoldTime: 150
Uptime: 00:00:32
Expires: 00:01:58
BIDIR-PIM configuration example
Network requirements
• In the BIDIR-PIM domain shown in Figure 52. Source 1 and Source 2 send different multicast
information to multicast group 225.1.1.1. Host A and Host B receive multicast information from the
two sources.
• VLAN interface 102 of Switch C acts as a C-BSR, and loopback interface 0 acts as a C-RP of the
BIDIR-PIM domain.
• IGMPv2 will run between Switch B and Host A, and between Switch D and Host B.
To Next Page
Loading...
Need help?
General
