8. Insert the edge of the paper into the printer.
WARNING! Do not push your ngers inside the printer's paper path.
TIP: When loading the upper roll, avoid inserting roll paper into the cut-sheet slot. If you do so, the
printer beeps and the front panel asks you to remove the paper.
9. Roll the paper into the printer until you feel resistance and the paper exes slightly. When the printer
detects the paper, it feeds it in automatically.
10. If the leading edge of the paper has a barcode, the printer reads and then cuts o the barcode; you
should remove and discard the cut strip of paper.
11. If the leading edge of the paper has no barcode, the front panel prompts you to select the paper
category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list, see The paper type
is not in the driver on page 124.
ENWW Load a roll into the printer 37
To Next Page
Loading...