HP LaserJet Enterprise 700 - Use the HP ePrint software

Use the HP ePrint software
The HP ePrint software makes it easy to print from a desktop or laptop computer to any HP ePrint-capable
product. After installing the software, open the Print option from within your application, and then select HP
ePrint from the installed printers list. This software makes it easy to nd HP ePrint-enabled products that are
registered to your ePrintCenter account. The target HP product can be at your desk or in a remote location,
such as a branch oce or across the globe—you can do remote printing by using the Internet. The target
product can be anywhere in the world; if it is Web-connected and registered in ePrintCenter, you can send a
print job to the product.
For Windows, the HP ePrint software also supports traditional direct IP printing to local network printers on
the network (LAN or WAN) to supported PostScript® products.
Go to www.hp.com/go/eprintsoftware for drivers and information.
Supported operating systems
●
Windows® XP (32-bit, SP 2 or greater)
NOTE: Microsoft retired mainstream support for Windows XP in April 2009. HP will continue to provide
best-eort support for the discontinued XP operating system.
●
Windows Vista® (32-bit and 64-bit)
●
Windows 7 (32-bit and 64-bit)
●
Mac OS X version 10.6 and 10.7
NOTE: The HP ePrint software is a PDF workow utility for Mac, and is not technically a print driver.
HP ePrint software for Mac supports print paths only through ePrintcenter and does not support direct
IP printing to local network printers.
120 Chapter 5 Print ENWW