HP LaserJet Enterprise 700 - Check the fit-to-page setting

3. Remove any visible lint or dust from each of the
feed rollers and the separation pad using
compressed air or a clean lint-free cloth
moistened with warm water.
NOTE: Lift up the roller assembly so you can
clean the second roller.
4. Close the document-feeder cover.
Check the t-to-page setting
If the Fit to Page setting is enabled, and the incoming fax is larger than the default page size, the product
attempts to scale the image to t the page. If this setting is disabled, larger images split across multiple
pages.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Fit to Page
3. Touch the Enabled option to enable the setting, or touch the Disabled option to disable it. Touch the Save
button.
274 Chapter 10 Solve problems ENWW