HP LaserJet Enterprise 700 - Automatic paper sensing (auto-sense mode); Auto-sense settings

4. Close the tray.
5. The control panel shows the tray’s paper type
and siz
e. If the conguration is not correct, follow
the instructions on the control panel to change
the size or type.
6. For custom-size paper, you need to specify the X
and Y dimensions f
or the paper when the prompt
displays on the product control panel.
Y
X
Automatic paper sensing (auto-sense mode)
The automatic paper type sensor functions when a tray is congured to the Any Type or plain type setting.
Af
ter it has picked up paper from the tray, the product can detect overhead transparencies, paper weight, and
gloss level.
For more control, select a specic paper type for the job or congure the tray for a specic paper type.
Auto-sense settings
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
42 Chapter 3 Input trays and output bins ENWW