HP Embedded Web Server
Use the HP Embedded Web Server to view product status, congure product network settings, and to manage
printing functions from your computer instead of from the product control panel. The following are examples
of what you can do using the HP Embedded Web Server:
●
View product status information
●
Determine the remaining life for all supplies and order new ones
●
View and change tray congurations
●
View and change the product control-panel menu conguration
●
View and print internal pages
●
Receive notication of product and supplies events
●
View and change network conguration
To use the HP Embedded Web Server, your browser must meet the following requirements:
●
Windows: Microsoft Internet Explorer 5.01 or later or Netscape 6.2 or later
●
Mac OS X: Safari or Firefox using Bonjour or an IP address
●
Linux: Netscape Navigator only
●
HP-UX 10 and HP-UX 11: Netscape Navigator 4.7
The HP Embedded Web Server works when the product is connected to an IP-based network. The HP
Embedded Web Server does not support IPX-based product connections. You do not have to have Internet
access to open and use the HP Embedded Web Server.
When the product is connected to the network, the HP Embedded Web Server is automatically available.
Open the HP Embedded Web Server
1. Identify the product IP address or host name. If the Network button is visible on the Home screen on
the product control panel, touch that button to display the address. Otherwise, follow these steps to
print or view the product conguration page:
a. From the Home screen on the product control panel, scroll to and touch the Administration button.
b. Open the following menus:
●
Reports
●
Conguration/Status Pages
●
Conguration Page
c. Touch the Print or View
button.
d. Find the IP address or host name on the Jetdirect page.
2. In a supported Web browser on your computer, enter the product IP address or host name in the
addr
ess/URL eld.
208 Chapter 9 Manage the product ENWW
To Next Page
Loading...
