HP LaserJet Enterprise 700 - Page 221

1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. To enable manual conguration, open the following menus:
●
Network Settings
●
Jetdirect Menu
●
TCP/IP
●
IPV6 Settings
●
Address
●
Manual Settings
●
Enable
Select the On option, and then touch the Save button.
3. To congure the address, touch the Address button and then touch the eld to open a keypad.
4. Use the keypad to enter the address, and then touch the OK button.
5. Touch the Save button.
ENWW Congure IP network settings 207