Connect the product to a computer by using a USB cable and
install the software (Mac OS X)
This product supports a USB 2.0 connection. Use an A-to-B type USB cable. HP recommends using a cable that
is no longer than 2 m (6.5 ft).
1. Connect the USB cable to the product and the computer.
2. Install the software from the CD.
3. Click the product ic
on, and follow the on-screen instructions.
4. Click the Close
button.
5. Print a page from any program to make sure that the software is correctly installed.
ENWW Connect the product to a computer by using a USB cable and install the software (Mac OS X) 21
To Next Page
Loading...
