HP LaserJet Enterprise 700 - Tray 2; Tray capacity and paper orientation

Tray 2
Tray capacity and paper orientation
To prevent jams, do not overll trays. Be sure the top of the stack is below the tray-full indicator. For short/
narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 3-4 Tray 2 capacity
Paper type Specications Quantity
Paper Range:
60 g/m
2
(16 lb) bond to 220 g/m
2
(59 lb) bond
Maximum stack height: 25 mm (.98 in)
Equivalent to 250 sheets of 75 g/m
2
(20 lb) bond
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 25 mm (.98 in)
Glossy paper Range:
105 g/m
2
(28 lb) bond to 220 g/m
2
(58 lb) bond
Maximum stack height: 25 mm (.98 in)
1
Tray 2 can print on bond paper heavier than 220 g/m
2
(59 lb) in some circumstances, but HP does not guarantee results.
Table 3-
5
Tray 2 paper orientation
Paper type Image orientation Duplex mode How to load paper
Preprinted or letterhead Portrait 1-sided printing Face up
Top edge at the back of the tray
Automatic 2-sided printing Face down
Top edge at the back of the tray
ENWW Tray 2 39